照片
|
特性 |
|
|
|
產品編號: |
TNC 連接器
|
|
|
規格特性: |
提供低噪音級別和穩定性達 11 GHz
可用於 50 和 75 ohm 版本。
苛刻環境中的首要選擇
小型刻螺紋接口可與符合 MIL-C-39012 規範的工業標準連接器互連。
可提供多種類型，包括電纜插頭和插座、適配器和印製電路板連接器。可提供標準和防水版本
|
|
| |
|
|
|
|
產品編號: |
PCB連接器-線對板-電源
|
|
|
規格特性: |
額定電流<5 amps
5 amps<額定電流<10 amps
10 amps<額定電流<20 amps
額定電流<20 amps
|
|
| |
|
|
|
|
產品編號: |
TSSK
|
|
|
規格特性: |
● Size : 3.35 x 3.35 x 1.5/2.0 mm
● Operating temperature range : －20℃ to ＋70℃
● Electrical performance
- Rating : 50mA, 12V DC
- Insulation resistance : 100MΩ min. 100V DC
- Dielectric strength : 250V AC for 1 min.
- Contact resistance : 100mΩ max.
● Lifetime : 50,000 Cycles, 100,000 Cycles, 1,000,000 Cycles
● Mechanical performance
- Operating force : 2:160 ± 50gf, 3:260 ± 70gf
- Travel : 0.20 ± 0.1mm
● Improve mounting density of components on PC board.
● Reflow solderable.
● Contacts are comletelysealed, enhancing reliability.
● Available with ground terminal for electrostatic discharge.
● Packaged with a 12mm wide embossed taping. |
|
| |
|
|
|
|
產品編號: |
PAC-MB-2317NL-1-P
|
|
|
規格特性: |
● 33.5 x 17.0 x H15.5 mm
● 5.0 V
● 25 mA
● 75 dBA
● 400 Hz
● 8.0 g
|
|
| |
|
|
|
|
產品編號: |
SE HD 140
|
|
|
規格特性: |
截面切割鉗
長度 140 mm
重量 203 g
淨重 180.1 g
|
|
| |
|
|
|
|
產品編號: |
SL 3.50/90G (3.50 mm, 90°)
|
|
|
規格特性: |
PCB 接插件, 插座, 側面封閉, 焊連接, 3.50 mm, 90°, 焊針長度 (l): 3.2 mm, 鍍錫, 橙色, 盒裝
IEC: 320 V / 17 A
UL: 300 V / 10 A |
|
| |
|
|
|
|
產品編號: |
雙螺紋射頻連接器
|
|
|
規格特性: |
壓接連接器僅需要一次壓接完成兩個導體及編織層和電纜支撐件
一次壓接，安裝費用降低
自鎖內接觸體的穩定性
易於檢查
|
|
| |
|
|
|
|
產品編號: |
PCB連接器-線對板-信號
|
|
|
規格特性: |
.050''間距
.050' x 0.100'''間距
.100''間距
.125''間距
.156''間距
.200''間距
<1mm間距
1mm-1.5mm間距
2mm間距
2.5mm間距
高速連接器-線對板
Pulse Lock連接器和端子 |
|
| |
|
|
|
|
產品編號: |
TSKA-J
|
|
|
規格特性: |
● Size : 5.2 x 5.2 x 0.8 mm (J Bend)
● Operating temperature range : －20℃ to ＋70℃
● Electrical performance
- Rating : 50mA, 12V DC
- Insulation resistance : 100MΩ min. 100V DC
- Dielectric strength : 250V AC for 1 min.
- Contact resistance : 100mΩ max.
● Lifetime : 50,000 Cycles, 100,000 Cycles, 1,000,000 Cycles
● Mechanical performance
- Operating force : 2:160 ± 50gf, 3:260 ± 70gf
- Travel : 0.25 ± 0.1mm
● 5.2×5.2mm dimensions suitable for high density mounting.
● Flat type with 0.8mm height in pursuit, for thin design. “With stem” type in pursuit for easier use.
● Contact sealed construction offers a highly reliable switch.
● Reflow solderable.
● Packaged with a 12mm wide embossed taping. |
|
| |
|
|
