照片
|
特性 |
|
|
|
產品編號: |
K47B
|
|
|
規格特性: |
• 8.0kV, Make & Break Load Switching, SPST-NC
• Normally closed version of K47
• Vacuum dielectric for power switching low
current loads
• 920 Ohm coil for low power consumption
• Meets requirements of MIL-R-83725
• QPL version available, M83725/18-003 |
|
| |
|
|
|
|
產品編號: |
PAC-PB-1408-P
|
|
|
規格特性: |
● Φ13.8 x H7.5 mm
● 12.0 V
● ≦12 mA
●≧85 dB
● 4000 Hz
● 0.8 g
|
|
| |
|
|
|
|
產品編號: |
K8F-K8F-A (160 ~ 400 A)
|
|
|
規格特性: |
● Dimension : 35.2Øx95mm
● Ampere Rating : 160 ~ 400 A
● Voltage Rating (DC) : 800 V
● Voltage Rating (AC) : 800 V
● Operating Temperature : -55 ℃ to 125 ℃
● Approvals : cULus
|
|
| |
|
|
|
|
產品編號: |
MET Fuse Holder
|
|
|
規格特性: |
● For MET Fuse
● Housing : PBT UL94-V0
● Insulation Resistance : 10³MΩ at V=100V
● Temperature Range : -55ºC to 125ºC
● Inner Clip : Beryllium coppergold plated, Heat treated
● Plating : Nickel / Tin
● Max. Current Rating : 6.3A
● Contact Resistance : <20MΩ
● Insertion Force : <200g
● Withdrawal Force : >50g
|
|
| |
|
|
|
|
產品編號: |
HTG174
|
|
|
規格特性: |
壓接工具, 端頭的壓接工具, 六邊形壓接 (六角形)
長度 200 mm
重量 420 g
淨重 449 g
|
|
| |
|
|
|
|
產品編號: |
HTX138
|
|
|
規格特性: |
壓接工具, 端頭的壓接工具, 六邊形壓接 (六角形)
長度 200 mm
重量 420 g
淨重 415.08 g
|
|
| |
|
|
|
|
產品編號: |
HTX188
|
|
|
規格特性: |
壓接工具, 端頭的壓接工具, 六邊形壓接 (六角形)
長度 200 mm
重量 420 g
淨重 450 g
|
|
| |
|
|
|
|
產品編號: |
LSF-SMT 7.62/180 (7.62 mm, 180°) / LSF-SMT 7.50/180 (7.50 mm, 180°)
|
|
|
規格特性: |
PCB 接線端子, 7.62 mm & 7.50 mm, 180°, 焊針長度 (l): 3.5 mm, 鍍錫, 黑色, 直插式彈片連接, 最大壓接面積: 1.5 mm², 管裝
IEC: 800 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 24 - AWG 16 |
|
| |
|
|
|
|
產品編號: |
TSW6-SA
|
|
|
規格特性: |
● Size : 7.2 x 7.2 x 4.7 mm
● Operating temperature range : －20℃ to ＋70℃
● Electrical performance
- Rating : 50mA, 12V DC
- Insulation resistance : 100MΩ min. 100V DC
- Dielectric strength : 250V AC for 1 min.
- Contact resistance : 100mΩ max.
● Lifetime : 50,000 Cycles, 100,000 Cycles
● Mechanical performance
- Operating force : 1:130±32gf, 2:300±75gf, 3:500±125gf, 4:200 ± 50gf
- Travel : 0.30＋0.4 / －0mm
● Snap-in type, which can be directly mounted on PC board.
● Part of output terminals can be used as jumper leads, thus making circuit design easy. |
|
| |
|
|
