照片
|
特性 |
|
|
|
產品編號: |
S06HBA
|
|
|
規格特性: |
• 9.0kV, No Load Switching, SPST-NO
• 8 amp continuous carry @ 7 Kvdc
• Vacuum dielectric for power switching low
current loads
• 100 million cycle mechanical life
• Carries 10A at DC; 6 amps at 30 MHz |
|
| |
|
|
|
|
產品編號: |
TSQG
|
|
|
規格特性: |
● Size : 12.0 x 12.0 x 7.3 mm (Square)
● Operating temperature range : －20℃ to ＋70℃
● Electrical performance
- Rating : 50mA, 12V DC
- Insulation resistance : 100MΩ min. 100V DC
- Dielectric strength : 250V AC for 1 min.
- Contact resistance : 100mΩ max.
● Lifetime : 50,000 Cycles, 100,000 Cycles
● Mechanical performance
- Operating force : 1:100 ± 50gf, 2:160 ± 50gf, 3:260 ± 70gf
- Travel : 0.30 ± 0.15mm
● Snap-in type, which can be directly mounted on PC board.
● Some of output terminals can be also used as jumper leads, thus making circuit design easy.
● Standard knobs are available.
● SMT Type Available. |
|
| |
|
|
|
|
產品編號: |
T92( 2 Form A/C, 40A/277VAC , 20A/28VDC,10A, 600VAC )
|
|
|
規格特性: |
• 40A switching capability
• Designed to control compressor loads to 3.5
tons, 110LRA / 25.3FLA
• Meets requirements of UL 508 and UL 873 spacings
- 8mm through air, 9.5mm over surface
• Meets requirements of VDE 8mm spacing, 4kV
dielectric coil-tocontact
• Meets requirements of UL Class F construction
• UL approved for 600VAC switching (1.5HP)
• Screw terminal version (consult factory for
availability, ratings)
• Anti-explosive version available (Meets EN
60079-15)
• WG version available (Meets EN 60335-1)
Typical applications
• HVAC,
• Residential / commercial appliances
• Industrial controls
• charging |
|
| |
|
|
|
|
產品編號: |
PAC-ST-A0930RP2-2-P
|
|
|
規格特性: |
● Φ9.0 x H2.5 mm
● 3.0 V
● 100 mA
● 16 Ω
● 80 dB
● 2730 Hz
● 0.5 g
|
|
| |
|
|
|
|
產品編號: |
CQ-2005
|
|
|
規格特性: |
● For 5x20mm Fuse
● Insertion & Extraction Force : 1Kg. Min.
● Dielectric Strength For 60 Sec : AC 2000V Min.
● Suitable Rated Current : 6.3A/250V
● Insulation Resistance At500VDC : 100MΩ Min
● Temperature Rise : 60ºC Max
● Voltage Drop : 15mV Max.
|
|
| |
|
|
|
|
產品編號: |
Slicer NO 16
|
|
|
規格特性: |
電纜刀, 軟導線和硬導線 帶PVC絕緣
長度 122 mm
重量 75 g
淨重 91 g
|
|
| |
|
|
|
|
產品編號: |
LP 10.16/90 (10.16 mm, 90°) / LP 10.00/90 (10.16 mm, 90°)
|
|
|
規格特性: |
PCB 接線端子, 10.16 mm & 10.00 mm, 90°, 焊針長度 (l): 3.2 mm, 鍍錫, 橙色, 壓線框聯接, 最大壓接面積: 6 mm², 盒裝
IEC: 1000 V / 32 A / 0.5 - 6 mm²
UL: 300 V / 20 A / AWG 26 - AWG 12 |
|
| |
|
|
|
|
產品編號: |
SSMA
|
|
|
規格特性: |
SMA 系列較小型號，性能超過 40 GHz
設計用於更小直徑半剛性和柔性同軸電纜。
符合適用的 MIL-39012 要求
可提供面板和防水安裝、條形傳輸線類型和密封配置 |
|
| |
|
|
|
|
產品編號: |
RP II/2(1.5mm)
|
|
|
規格特性: |
Dimensions(L x W x H)(mm):29.0 x 12.6 x 25.5
2 Form A and 2 Form C, single contact.
Rated current: 8A/12A/16A
Rated voltage: AC 250 Vac / 440 Vac |
|
| |
|
|
